You can almost let your imagination run wild when we work with the graphic expression. You can in collaboration with HAI og HAIs partners make unique innovations. We offer anodizing and graphic treatments as a complete package. Contact us to hear more about the possibilities.
Silk screen printing
Screen printing can be applied to flat aluminum blanks. In silk-screen printing, two component colors are used, which are burned firmly by printing in an oven. This means that all Pantone colors can be freely selected. Silk-screen printing is perfect for decoration that is not subject to wear and tear. Silk printing can give a nice shine - however, the color can also be matted
Photo-anodization
Photo-anodization can be applied to flat, open aluminum blanks. With photo-anodization, the special color is burned into the open aluminum blank by pressing in an oven, and all Pantone colors can be selected. After burning in sealed the subject, cleaning off excess color. Photo-anodization is resistant to wear, weather and wind, as well as chemicals, and does not fade over time.
Tampon pressure
Pad printing can be used on almost all aluminum blanks, and anodized blanks in particular provide extra good adhesion because you can leave the pores open and seal them after printing.
Pad printing can be used for both 2D and 3D printing, so the only limit is your imagination. Pad printing can be used on almost all objects – both flat, round, cylindrical, concave and convex.
If you choose this solution, you get the opportunity to give your products an exclusive look with very fine details, even with very small texts.
Blowing is an effective mechanical pre-treatment that is used when there are special requirements for the aluminum's structure or hardness. Blasting leaves a nice, uniform and matte surface at the same time, the treatment can to a certain extent remedy machining surfaces, grinding marks, tensile and heat streaks, which are visible on the raw material. This is due to changes in the material structure, which achieves the more uniform surface and with a matte appearance before further processing.
HAI offers several different blowing media with different roughness in the structure to give the uniform surface a broken structure.
We have different variants of blowing agents, where depending on the desired result, you can choose between; glass beads, precious corundum, stainless steel balls, stainless steel grit and mixed blasting agent.
We have a blowing agent that suits your needs regardless of the application or the physical characteristics of the component.
The treatment takes place in a closed cabin, where our operators blow fine grains of glass against the aluminum blanks. This achieves a uniform surface and a nice finish on the entire item.
Blowing is a pre-treatment process that can be equated with other mechanical pre-treatments such as grinding, brushing and polishing.
HAI can blow glass profiles up to 8 meters in a continuous plant and offers economically advantageous glass blowing in fully automatic plants.
Monday - Thursday at 8.00 - 16.00
Friday at 8.00 - 15.30
Monday - Thursday at 7.00 - 15.15
Friday at 7.00 - 14.45
